• February 27, 2020 at 3:24 am #129953
    fish54a
    Participant

    NEMA 14 stepper motor
    Step Angle 0.9°/1.8°(0.6°/1.2°)
    Step Angle Ettor 5%
    Temperature rise 80°C Max
    Service Environment Temperature -20°C~+50°C
    Service Environment Humidity <85%RH
    Insulation Resistance 100MΩ Min 500VDC
    Insulation Dielectric Strength 600V AC 1 minute
    Axiai Clearance 1mm Max
    Shaft Axial Play 0.02mm Max

    Boundary Dimension(unit:mm)

    Wiring Diagram(unit:mm)

    Technical Parameters(unit:mm)

    The NEMA 14 is a smaller and neater motor that was used on the prototype. Compared to a NEMA 17 it needs less space and typically weights less, so it’s often seen in small printers,.
    Series ModelNEMA 14 Frame size (20 x 38mm)
    Step Angle1.8°Step Angle
    HoldingTorque0.018NM
    PrecisionHigh step Accuracy and Resolution
    CertificationCE Certified and RoHs
    The motor selectionCan the customized for
    Widing current
    Shaft options
    Cablea and connectors
    Shenli stepper motor can customize the winding to perfectly match your voltage, current, and maximum operating speed. Special shaft modifications, cables and connectors are also available upon request.
    Need help choosing the right Stepper Motor? Read this: Uni-polar vs Bi-polar or learn more about Stepper Motor Basics.
    NEMA 14 suppliers
    website:http://www.szslph.com/steeper-motor/nema-14/

You must be logged in to reply to this topic.