• April 4, 2019 at 3:35 am #69892
    dwpyy12
    Participant

    product information
    Custom processing: Yes
    Working voltage: 5~7(V)
    Working current: 0.1 (A)
    Power: 0.5~0.8(W)
    Color: yellow shell, bright red light
    Scope of application: High-speed road edge, urban road diversion, beautiful squares and streets
    installation method
    (1) Positioning: Firstly, use the ruler to determine the installation position, ensure that the longitudinal position of each position is in a straight line, the installation distance and design requirements shall prevail, and the installation site shall be flat, dry, clean and free of gaps. Take the solar road nail or template to draw the hole and drill it with a hammer with a diameter of ∮8mm. The depth of the hole is 5cm. After drilling the hole, clean the ash, install the rubber plug into the hole, and level it with the road surface.
    (2) Mixing glue: special nail glue for road nails, special glue for road nails, and the ratio of glue A glue is 1:1 (for example: 1 kg for A glue and 1 kg for B glue). The glue must be evenly mixed and the color is consistent.
    (3) Use screws on the rubber: the road surface should be cleaned during installation. The glue should be moderate. Stick to the bottom surface of the spike and do not overflow too much. About 40-50 grams of glue should be applied to each spike to apply glue. Place the bottom of the road sign in the position where the hole is made, and then tighten the rubber plug with two special screws. Clean the road debris after installation.
    (4) Inspection: The installed spikes should be inspected twice after two hours.
    (5) Road closure: It is recommended to seal the road for 6 hours to ensure the curing time of the glue.
    Company Information
    Since its found in 2003 in chongqing,China, Chuangdi has been dedicated to technological innovation in a wide range of LED display, LED traffic signal, solar traffic signal,LED traffic lights and control systems. Through more than 14 years hard working , We hold more than 80% market in southwest of China in the field of traffic led products, We always keep cooperate with China State Construction Engineering Corporationn (CSCEC), China Communication Construction Corporation (CCCC), China Railway Engineering Corporation (CREC) to join in the domestic and overseas biddings and projects constructions.

    Our Workshop

    Packaging & Shipping

    carton case flight case wooden case

    Three kinds of packing are all available.

    By ship, air and express are all available .

    Certifications
    We can provide the electronic edition certificates for Group control ASA plastic case fireproof LED road stud if you need, or you can see the original documents in our factory. We can ensure the truth of our certificates.

    FAQ
    Do you have your own factory or trading company?
    A: We have our own factory in Chongqing with more than 14 years’ experiences.
    Q: What products does Chuangdi provide?
    A: We provide LED display screen, LED electronic bridge equipments, LED traffic lights and control systems.
    Q: Do you have any MOQ of the products?
    A: Normally, our MOQ is just 1pcs, sample order is welcomed.
    Q: What is your warranty time?
    A: Two years.
    Q: How can I make a order
    A : You can send us inquiry via alibaba or TM , once received your inquiry we will contact you in 24 hours .
    You can also contact us by email , skype or by telephone ,tell us the model and quantity you need , we will reply you accordingly
    Q: What’s the shipping method do you offer ?
    A : For small order , we can ship by DHL, UPS,TNT, FedEx, EMS, for large order we can ship by air and sea or according to your request.Solar Traffic Light Sign manufacturers
    website:http://www.cdtrafficled.com/led-light/solar-traffic-light-sign/

You must be logged in to reply to this topic.